Filter
Top Products
OEPL1 Command - Set Line Mode
Description: This command is used to switch the printer op
-
erating mode from Page Mode (EPL2) to Line
Mode (EPL1 emulation).
Line Mode configuration setting is retained after
reset has been issued or power has been cycled.
Syntax OEPL1
Example:
OEPL1¿
Returning to
Page Mode
The Line Mode command EPL2 can be sent to
the printer to return the printer to Page (EPL2)
Mode operation.
The EPL2 command is preceded by an ESCape
(27 dec or 1Bh) character and followed by a line
feed (LF - 10 dec or 0A hex), a carriage return
(CR - 13 dec or 0D hex) or CR/LF.
Example:
¬EPL2¿
980352-001 Rev.A
3-75