Filter
Top Products
A Command - ASCII TEXT
Simple Expressions
in Data Fields
An advanced function of the A command allows
addition and subtraction to be performed on
constant and variable values in flash printers.
Syntax Ap
1
,p
2
,p
3
,p
4
,p
5
,p
6
,p
7
,"DATA"[p
8
p
9
p
10
…]
Parameters For the p
1
- p
7
and “DATA” parameters -
See first page of A command, page 3-4.
p
8
= Required. Must be a variable data field
number, e.g. V00, V01 etc.
p
9
= Required. Operator, + or –
p
10
= Required. Variable data field number
or constant value.
Valid Number Ranges:
Constant = 0 to 2147483647
Variable = 0 to 2147483647
Result = -2147483648 to 2147483647
❏The Expression must start with a variable
field.
❏The character field length defined for the first
variable in the expression will be used to for
-
mat the result. If the result is of a greater
length than the defined character length,
then the result field will contain ‘X’s.
❏
A syntax error will be generated during form
store if the constant value is too large.
❏
If an error occurs during the evaluation of the
expression, the resultant field will be filled
with ‘X’s.
980352-001 Rev.A
3-7