Filter
Top Products
Installation
Install a Radio Card in a Wireless Print Server
38
P1043301-005 11/21/13
3. Position the notch on the wireless radio card on the top, leading edge. Insert the wireless
radio card into the wireless option card slot on the back of the printer until the card-eject
button pops out.
4. Place the RF card cover over the wireless radio card, and secure it with a small screw.
5. Turn on (I) the printer.
The printer restarts and uses the wireless radio card to communicate with your WLAN.
Allow several minutes for the printer to connect to the network. For more information
about wireless status, refer to View Wireless Status through the Control Panel on page 52
or Troubleshooting the Wireless Print Server on page 139.
1
Wireless radio card
2
Notch
3
Wireless option card slot
on back of printer
4
Card-eject button
Note • The S4M, ZM400, ZM600, RZ400, and RZ600 printers do not use the RF card
cover.
1
Clear plastic RF card cover
(not used on all printers)
2
Screw
3
Wireless radio card
4
2
1
3
3
1
2