Filter
Top Products
14
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
Dual-sided Lamination
P720 Plastic Card Printer
Appendix C
2 • 2 Loading Printing Ribbons
The P720 Printer requires approved ribbons (see Appendix C). The Resin Thermal Transfer and Dye Sublimation
ribbons and Lamination are specifically designed for your P720 Printer. For optimum performance and printer life
(Print Head), always use approved ribbons.
DO NOT TOUCH the print head or the electronic components on the print head
carriage. Discharges of electrostatic charge from the human body or other
surfaces can damage the print head or other electronic components used in this
device.
1 •Remove ribbon from packaging.
2 •With printer power ON and Printer Ready status, open cover and press down on the Print Head Unlock Lever to
open the print head carriage. The print head carriage will pop open.
3 •Load ribbon onto the supply spindle “1”(under print head carriage) and empty core ( with tape attached) onto
the take-up spindle “2”.
Make sure the ribbon comes off the top of the supply spindle and feeds to the top of the take-up spindle.
4 •Push down on the Print Head Lock Lever until an audible “click” signals the locked-down position.
5 •Close Cover.