Filter
Top Products
38
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
Dual-sided Lamination
P720 Plastic Card Printer
Appendix C
A cleaning using the Cleaning System with cards usually suffices, moreover your printer is equipped with two
cleaning rollers situated before the card enter the Laminator.
The upper roller has a coating that collects any loose particles on the surface of cards. However, a separate
Laminator Station cleaning can remove more stubborn deposits.
To avoid deposits, only use foam-tipped swabs.
Never touch the rollers with fingers.
It is recommended to perform this cleaning function prior to daily operation or
when laminator has been in “stand-by” mode due to high temperatures.
WHEN TO MAINTAIN
Cleaning frequency varies with different environments. Clean when lamination
anomalies persist.
HOW TO MAINTAIN
1 •S
witch OFF your printer and open cover.
2 • Unplug the two connectors “1”.
3 • Turn knob ”2” in the appropriate direction until you release the Top laminator
bracket.
4 • Pull the Top laminator bracket and access the laminator rollers for cleaning
withfoam-tipped swabs.
5 • Make sure the rollers are dry before Pushing down the braquet and switching
on your printer.