Filter
Top Products
36
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
Dual-sided Lamination
P720 Plastic Card Printer
Appendix C
A cleaning using the cleaning system with cards usually suffices. However, a separate Print head cleaning using
swabs can remove more stubborn deposits when print anomalies persist. To avoid deposits, only use foam-tipped
swabs.
1 • Switch power Off, open cover, raise Print Head and remove the Ribbon.
2 • Clean Print Head by moving alcohol-moistened swab tip side-to-side across Print
Head elements. Only use moderate force.
Make sure the elements are dry before switching on.
(To reorder swabs see Appendix C).
Never use a sharp object to scrape deposits from the print head. Permanent dama-
ge will result.
4 • 2 Cleaning Magnetic Encoder only
WHEN TO CLEAN
When the LCD screen reports messages : “Cleaning Magnetic Endoder”
HOW TO CLEAN
• Leave power on.
Open Cover and release Print Head Bracket to remove ribbon.
Close Print Head Bracket
Close Cover. Remove cards from Card Feeder.
• Insert one abrasive Pre-Saturated Cleaning Card (provided) through slot on the side of the Card feeder Cover.
• Press the right panel button for a few seconds. The card will feed into printer and carry out the cleaning process.
repeat the process with a new Cleaning card if necessary.