Filter
Top Products
19
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
Dual-sided Lamination
P720 Plastic Card Printer
Appendix C
Card thickness:
A - 50mil (1.27mm)
B - 40mil (1.016mm)
C - 30mil (0.762mm)
B - CARD THICKNESS CONTROL LEVER
This items is operated by the user to prevent more than one card feeding into the printer at the same time and
causing a jam.
Open cover, and adjust lever to the correct position for the card thickness you are
using. Repeat for different card thickness. (Factory setting is for 30 mil (0,762 mm)
card thickness). See diagram below:
Note:When laminating cards, always use 30 mil PVC Composite Cards.
C - CARD OUTPUT HOPPER
This items is used for printing cards.
Install card Output hopper onto printer by hooking over bottom edge of card
exit aperture.