Filter
Top Products
P100IH ISDN Router
11-2 System Maintenance
11.1 System Status
The first selection, System Status, gives you information on the status and statistics of the ports, as shown
below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you
information on your ISDN telephone line status, number of packets sent and number of packets received.
To get to the System Status, select number
24
to go to
Menu 24 - System Maintenance.
From this menu,
select number
1,
System Status.
There are five commands in
Menu 24.1 - System Maintenance -
Status
. Entering
1
disconnects the current B1 channel call;
2
disconnects the current B2 channel call,
3
resets the counters,
4
drops both B1 and B2 and
ESC
takes you back to the previous screen.
The table below describes the fields present in
Menu 24.1 - System Maintenance - Status
. It should be
noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.
Figure 11-2 Menu 24.1 - System Maintenance – Status
The following table describes the fields present in
Menu 24.1 - System Maintenance - Status
.
Table 11-1 System Maintenance - Status Menu Fields
Field Description
Chan
Shows statistics for
B1
and
B2
channels respectively. This is the
information displayed for each channel:
Link Shows the name of the remote node or the user the channel is
currently connected to or the status of the channel (Down, Idle,
Calling or Answering).
Menu 24.1 -- System Maintenance – Status
Chan
--
--
Link
Down
Down
Type
0Kbps
0Kbps
TXPkts
0
0
RXPkts
0
0
Errors
0
0
CLU
0%
0%
ALU
0%
0%
Up Time
0:00:00
0:00:00
Total Outcall Time: 0:00:00
Ethernet:
Status: 10M/Half Duplex
TX Pkts: 230
RX Pkts: 0
Collisions: 0
WAN:
Chan 1 IP Addr:
Chan 2 IP Addr:
Chan 1 CLID:
Chan 2 CLID:
LAN Packet Which Triggered Last Call:
Press Command:
COMMANDS: 1-Drop B1 2-Drop B2 3-Reset Counters 4-Drop All ESC-Exit