Filter
Top Products
P100IH ISDN Router
4-6
NAT
Step 1.
Enter 11 from the Main Menu.
Step 2.
Move the cursor to the
Edit IP
field, press the [SPACEBAR] to toggle the default
No
to
Yes
,
then press [ENTER] to bring up
Menu 11.3 - Remote Node Network Layer Options.
Figure 4-5 Applying NAT to the Remote Node
The following table describes the options for Network Address Translation.
Table 4-2 Applying NAT in Menus 4 & 11.3
Field Options Description
Full Feature
When you select this option the SMT will use
Address Mapping Set 1 (Menu 15.1 – see section
4.5.1 for further discussion). You can configure any
of the 5 mapping types described in
Table 4-1 NAT
Mapping Types
.
None
NAT is disabled when you select this option.
Network
Address
Translation
SUA Only
When you select this option the SMT will use
Address Mapping Set 255 (Menu 15.1 – see section
4.5.1). It is a convenient, pre-configured, read only
Many-to-1 port mapping set, sufficient for most
purposes and helpful to people already familiar with
SUA in previous ZyNOS versions. Note that there is
also a
Server
type whose IGA is
0.0.0.0
in this set.
Menu 11.3 - Remote Node Network Layer Options
Rem IP Address= 172.16.1.20
IP Subnet Mask= 255.255.0.0
My WAN Addr = 192.168.1.10
NAT= Full Feature
Address Mapping Set= 4
Metric= N/A
Private= N/A
RIP Direction= Both
Version= RIP-2B
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.