Filter
Top Products
P100IH ISDN Router
NAT 4-21
Some applications still won’t work through NAT even when using types One-to-One and
Many-to-Many No Overload mapping types.
Follow the steps outlined in example 3 above to configure these two menus as follows.
Figure 4-24 Example 4- Menu 15.1.1.1
After you’ve configured this menu, you should see the following screen.
Figure 4-25 Example 4 - Menu 15.1.1 - Address Mapping Rules
Menu 15.1.1.1 –Example4- Rule 1
Type= Many-to-Many No Overload
Local IP:
Start= 192.168.1.10
End = 192.168.1.12
Global IP:
Start= 10.132.50.1
End = 10.132.50.3
Press ENTER to Confirm or ESC to Cancel:
Menu 15.1.1 - Address Mapping Rules
Set Name= Example4
Idx Local Start IP Local End IP Global Start IP Global End IP Type
--- --------------- --------------- --------------- --------------- ------
1. 192.168.1.10 192.168.1.12 10.132.50.1 10.132.50.3 M-M No Ov
2.
3.
4.
5.
6.
7.
8.
9.
10.
Action= Edit Select Rule=
Press ENTER to Confirm or ESC to Cancel: