Filter
Top Products
P100IH ISDN Router
System Maintenance 11-25
Table 11-7 Time and Date Setting Fields
Field
Description
Use Time Server when
Bootup=
Enter the time service protocol that your timeserver will send when the
Prestige powers up. Choices are
Daytime (RFC 867)
,
Time (RFC-868)
,
NTP (RFC-1305)
and
None
. The main differences between them are the
format, e.g., the
Daytime (RFC 867)
format is day/month/date/year/time
zone of the server while the
Time (RFC-868)
format gives a 4-byte
integer giving the total number of seconds since 1/1/1970 at 0:0:0. The
NTP (RFC-1305)
format is similar. Not all timeservers support all
protocols, so you may have to check with your ISP/network administrator
or use trial and error to find a protocol that works. If you select
None
(this is the default value), you can enter the time manually but each time
the system is booted, the time & date will be reset to
1970-1-1 0:0:0
.
Time Server IP
Address=
Enter the IP address of the your timeserver. Check with your
ISP/network administrator if you are unsure of this information.
Current Time:
New Time Enter the new time in hour, minute and second format.
Current Date:
New Date Enter the new date in year, month and date format.
Time Zone= GMT+0800 Press the [SPACE BAR] to set the time difference between your time
zone and Greenwich mean Time (GMT). Be aware if/when daylight
savings time alters this time difference for your time zone.
Once you have filled in the new time and date, press [Enter] to save the setting and press [Esc] to
return to
Menu 24
.