Filter
Top Products
P100IH ISDN Router
2-12 Hardware Installation and Setup
PABX Outside Line
Prefix
Enter the number for outside line access if the Prestige is connected to
a PABX; otherwise, leave it blank. The maximum number of digits is
4.
Outgoing Calling
Party Number
You only need to fill in this field if your switch requires a specific
Outgoing Calling Party Number
; otherwise, leave it blank.
Incoming Phone
Number Matching
Determines how incoming calls are routed. The choices for this field
are
Multiple Subscriber Number (MSN)
,
Called Party Subaddress
and
Don’t Care
.
Analog Call Routing
Select the destination for analog calls. The choices are
A/B Adapter
1
,
A/B Adapter 2
and
Ignore
. This field is only applicable when
Incoming Phone Number Matching
is
Don’t Care
.
Global Analog Call
Select how to handle global analog calls. The choices are
Accept
and
Ignore
. This field is not applicable when the
Analog Call Routing
is
Ignore
.
Edit Advanced
Setup
Select
Yes
and press
Enter
to go to the advanced setup submenu
(DSS1 only).
2.9.3 Advanced Setup
Select
Yes
in the
Edit
Advanced Setup
field of
Menu 2 – ISDN Setup
to display menu 2.1 below.
ISDN Call Waiting
This allows you to place a call on hold while you answer another incoming call on the same telephone
(directory) number. By default call waiting is enabled on both telephone ports (except for France), but can
be disabled on either port from
Menu 2.1
How to use call waiting
The
Call Waiting
feature on your ISDN line works in exactly the same way as it does on a regular analog
line. After hearing a call waiting indicator tone, press and immediately release the flash button on your
telephone. This puts your current call on hold and answers the incoming call.
Calling Line Indication
The
Calling Line Indication
, or Caller ID, governs whether the other party can see your number when you
call. If set to
Enable
, the Prestige sends the caller ID and the party you call can see your number; if it is
set to
Disable
, the caller ID is blocked.