Filter
Top Products
P100IH ISDN Router
6-2 Remote Node TCP/IP Configuration
6.1.1 Remote Node Setup
Follow the procedure below
to configure the TCP/IP parameters in Menu 11 - Remote Node Profile.
Follow the steps below to edit Menu 11.3 - Remote Node Network Layer Options shown below.
Move the cursor to the
Edit IP
field, then press the space bar to toggle and set the value to
Yes
. Press
[Enter]
to open Menu 11.3 - Network Layer Options.
Figure 6-2 Menu 11.3- Remote Node TCP/IP Options
The following diagram explains the Sample IP Addresses to help you to understand the field of
My Wan
Addr
in Menu 11.3.
Menu 11.3 - Remote Node Network Layer Options
IP Options:
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= None
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Enter here to CONFIRM or ESC to CANCEL: