Filter
Top Products
P100IH ISDN Router
Dial-In Server Configuration 7-5
Recv. Authen This field sets the authentication protocol for incoming
calls. For security reason, setting authentication to none
is strongly discouraged. Options for this field are:
z
CHAP/PAP
- Your Prestige will try CHAP first, but
PAP will be used if CHAP is not available.
z
CHAP
– Use CHAP only.
z
PAP
– Use PAP only.
z
None
– Your Prestige tries to acquire CHAP/PAP
first, but no authentication is required if CHAP/PAP
is not available.
CHAP/PAP
CHAP
PAP
None
Compression Turn on/off Stac Compression. The default for this field
is
Off
.
On
Off
Mutual Authen Some vendors, e.g., Cisco, require mutual
authentication, i.e., the node that initiates the call will
request a user name and password from the far end that
it is dialing to. If the remote node requires mutual
authentication, set this field to
Yes
.
Yes/No
O/G Login Enter in the login name to be used to respond to the
peer’s authentication request.
O/G Password Enter in the outgoing password to be used to respond to
the peer’s authentication request.
Multiple Link Options:
Max Trans Rate Enter the maximum data transfer rate between your
Prestige and the remote dial-in user.
64
- At most, one B
channel is used.
128
- A maximum of two channels can
be used. When the Prestige calls back to the remote
dial-in user, the maximum data transfer rate is always
64.
64/128
Callback Budget
Management:
Allocated Budget (min
)
This field sets the budget callback time for all the remote
dial-in users. The default for this field is
0
for no budget
control.
Default =
0
Period (hr) This field sets the time interval to reset the above
callback budget control.