Filter
Top Products
P100IH ISDN Router
NAT 4-11
Field Description Option
one will be advanced one rule.
Save Set
means to
save the whole set (note when you choose this action,
the
Select
Rule
item will be disabled).
Select Rule
When you choose
Edit
,
Insert Before
or
Delete
in the
previous field the cursor jumps to this field to allow you
to select the rule to apply the action in question.
1
N.B.: Save Set in the Action field means to save the whole set. You must do this if you
make any changes to the set – including deleting a rule. No changes to the set take
place until this action is taken.
Be careful when ordering your rules as each rule is executed in turn beginning from
rule 1.
Selecting
Edit
in the
Action
field and then selecting a rule brings up the following menu,
Menu 15.1.1.1
-
Address Mapping Rule
in which you can edit an individual rule and configure the Type, Local and Global
Start/End IPs displayed in Menu 15.1.1.
Figure 4-10 Editing The First Rule in a Set
Menu 15.1.1.1
-
Marc - Rule 1
Type= Many-to-One
Local IP:
Start= 0.0.0.0
End = 255.255.255.255
Global IP:
Start= 0.0.0.0
End = N/A
Server Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.