ZyXEL Communications 240B Network Card User Manual


 
ExpWave 240B Secure Outdoor Ethernet Radio Link
1-2 Getting to Know Your ExpWave
IP Policy Routing
IP Policy Routing provides a mechanism to override the default routing behavior and alter packet forwarding
based on the policies defined by the network administrator.
SNMP
SNMP (Simple Network Management Protocol) is a protocol used for exchanging management information
between network devices. SNMP is a member of the TCP/IP protocol suite. Your ExpWave supports SNMP
agent functionality, which allows a manager station to manage and monitor the ExpWave through the network.
The ExpWave supports SNMP version one (SNMPv1).
DHCP (Dynamic Host Configuration Protocol)
DHCP (Dynamic Host Configuration Protocol) allows the individual client computers to obtain the TCP/IP
configuration at start-up from a centralized DHCP server. The ExpWave has built-in DHCP server capability,
enabled by default, which means it can assign IP addresses, an IP default gateway and DNS servers to all
systems that support the DHCP client.
Full Network Management
Most functions of the ExpWave are also software configurable via the SMT (System Management Terminal)
interface. The SMT is a menu-driven interface that you can access from a terminal emulator through the
console port or over a telnet connection.
Logging and Tracing
Built-in message logging and packet tracing.
Unix syslog facility support.
Upgrade ExpWave Firmware via LAN
The firmware of the ExpWave can be upgraded via the LAN.
Embedded FTP and TFTP Servers
The ExpWave’s embedded FTP and TFTP Servers enable fast firmware upgrades as well as configuration file
backups and restoration.
1.4 Benefits of the ExpWave 240B
VPN/IPSec tunnels protect sensitive data transmission on air.
MAC & 802.1x based mutual link authentication enhance system privacy
Wireless relay capability overcomes NLOS and extend communication distance
Point to two points architecture can be configured to give you multi-site connection capability
Outdoor-mounted design minimizes RF cable loss connecting to antenna and thus has outstanding
performance in longer communication distance
High data throughput achieves rapid return on investment for inter-building connection compared to T1
leased line.
Graded IPSec security level through System Management Terminal (SMT) offers easy configuration and
usage.
Power over Ethernet (POE) connection & special antenna alignment kit provide fast installation and easy
operation