Filter
Top Products
ExpWave 240B Secure Outdoor Ethernet Radio Link
14-2 Remote Management
To disable remote management of a service, select Disable in the corresponding Server Access field.
Enter 11 from menu 24 to bring up Menu 24.11 – Remote Management Control.
Figure 14-2 Menu 24.11 – Remote Management Control
Table 14-1 Menu 24.11 – Remote Management Control
FIELD DESCRIPTION EXAMPLE
Telnet Server
FTP Server
SNMP Service
DNS Service
These read-only labels denote the kind of server that you may remotely
manage.
Server Port Change the service port number for corresponding services in this field. 23
Server Access Select the access interface (if any) by pressing [SPACE BAR], then
[ENTER] to choose from: LAN only, WAN only, ALL or Disable.
LAN Only
(default)
Secured Client IP
The default value for Secured Client IP is 0.0.0.0, which means you
don’t care which host is trying to use a service (Telnet or FTP).
If you enter an IP address in this field, the ExpWave will check if the
client IP address matches the value here when a (Telnet or FTP)
session is up. If it does not match, the ExpWave will disconnect the
session immediately.
If the Server Access field is set to Disable, then this field is N/A.
0.0.0.0
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.
14.5.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1. A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet or FTP service.
2. You have disabled that service in menu 24.11.
3. The IP address in the Secured Client IP field (menu 24.11) does not match the client IP address. If it does not
match, the ExpWave will disconnect the session immediately.
4. There is an SMT console session running.
5. There is already another remote management session of the same type (FTP or Telnet) running. You may only
have one remote management session of the same type running at one time.
Menu 24.11 - Remote Management Control
TELNET Server: Port = 23 Access = LAN only
Secured Client IP = 0.0.0.0
FTP Server: Port = 21 Access = LAN only
Secured Client IP = 0.0.0.0
Web Server: Port = 80 Access = LAN only
Secured Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = LAN only
Secured Client IP = 0.0.0.0
DNS Service: Port = 53 Access = LAN only
Secured Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: