Filter
Top Products
ExpWave 240B Secure Outdoor Ethernet Radio Link
3-8 Initial Setup
OPERATION KEYSTROKES DESCRIPTION
keys the next field, respectively.
Entering
information
Fill in, or press
[SPACE BAR], then
press [ENTER] to
select from choices.
You need to fill in two types of fields. The first requires you to type in
the appropriate information. The second allows you to cycle through
the available choices by pressing [SPACE BAR].
Required fields
<
? >
All fields with the symbol <?> must be filled in order be able to save
the new configuration.
N/A fields <N/A> Some of the fields in the SMT will show a <N/A>. This symbol refers
to an option that is Not Applicable.
Save your
configuration
[ENTER] Save your configuration by pressing [ENTER] at the message “Press
ENTER to confirm or ESC to cancel”. Saving the data on the screen
will take you, in most cases to the previous menu.
Exit the SMT Type 99, then press
[ENTER].
Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
3.3.1 Main Menu (Routing AP)
After you enter the password, the SMT displays the ExpWave Main Menu, as shown next.
Figure 3-19 ExpWave Main Menu
3.3.2 Summaries of SMT Menu
Table 3-3 Main Menu Summary
NO. MENU TITLE FUNCTION
1 General Setup Use this menu to set up dynamic DNS and administrative information.
3 LAN Setup Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP
settings.
5 Wireless Setup Use this menu to configure your wireless settings
6 Network Setup Use this menu to set up the point-to-point network.
12 Static Routing Setup Configure IP static routes in this menu.
21 Filter Setup Configure filters.
Copyright (c) 1994 - 2002 ZyXEL Communications Corp.
ExpWave 240B-AP Main Menu
Getting Started Advanced Management
1. General Setup
3. LAN Setup
5. Wireless Setup
6. Network Setup
Advanced Applications
12. Static Routing Setup
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
25. IP Routing Policy
99. Exit
Enter Menu Selection Number: