Filter
Top Products
ExpWave 240B Secure Outdoor Ethernet Radio Link
Initial Setup 3-5
Figure 3-11 TCP/IP and DHCP Ethernet Setup
Step 3. In AP’s Menu 5, set ESSID= Wireless and Channel ID.
Figure 3-12 Wireless Setup
Step 4. In AP’s Menu 6, set AC1 Operation mode=Enabled, Pre_Share Key=951753258, IP=192.168.223.1, Network
Mask=255.255.255.0, MAC Address=00:02:CF:13:46:79 (the same as AC1’s MAC Address), and set DHCP
Edit=YES.
Figure 3-13 Router Mode Network Setup
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= None
Configuration:
Client IP Pool Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
Secondary DNS Server= N/A
DHCP Server Address= N/A
TCP/IP Setup:
IP Address= 192.168.80.217
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
IP Policies=
Press ENTER to Confirm or ESC to Cancel:
Menu 5 – Wireless Setup
ESSID= Wireless
Channel ID= CH07 2442 MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Menu 6 - Router Mode Network Setup
AP AC1 AC2
Operation mode: Enabled Disabled
Device ID: 1 2 N/A
Pre_Share Key: 951753258 N/A
Ethernet (LAN) Setting:
LAN IP: 192.168.80.217 192.168.223.1 N/A
Network Mask: 255.255.255.0 255.255.255.0 N/A
RIP Direction: Both Both N/A
RIP Version: RIP-2B RIP-2B N/A
DHCP Edit: No N/A
Wireless (WLAN) Setting:
MAC Address: 00:02:CF:13:46:79 N/A
VPN Security: None N/A
AC1&AC2 VPN Security: None
Press ENTER to Confirm or ESC to Cancel: