Filter
Top Products
ExpWave 240B Secure Outdoor Ethernet Radio Link
9-2 Filter Setup
9.2 Configuring a Filter Set
To configure a filter sets, follow the procedure below:
Step 1. Select option 21. Filter Set Configuration from the Main Menu to open Menu 21.
Figure 9-2 Menu 21 - Filter Set Configuration
Step 2. Select the filter set you wish to configure (no. 1-12) and press [Enter]
.
Step 3. Enter a descriptive name or comment in the Edit Comments field and press Enter.
Press [Enter] at the message: [Press ENTER to confirm] to open Menu 21.1 - Filter Rules Summary.
Figure 9-3 Menu 21.1 - Filter Rules Summary
9.3 Filter Rules Summary Menu
This screen shows the summary of the existing rules in the filter set. The following tables contain a brief description
of the abbreviations used in Menu 21.1.
Table 9-1 Abbreviations Used in the Filter Rules Summary Menu
Abbreviations Description Display
# Refers to the filter rule number (1-6).
A Refers to Active. [Y] means the filter rule is active.
[N] means the filter rule is inactive.
Type Refers to the type of filter rule.
This shows GEN for generic, IP for
TCP/IP
[GEN] for Generic
[IP] for TCP/IP
Filter Rules The filter rule parameters will be
displayed here (see below).
M Refers to More. [Y] means there are more rules to check.
Menu 21.1 - Filter Rules Summary
# A Type Filter Rules M m n
- - ---- -------------------------------------------- --------- - - -
1 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=53 N D F
2 Y
3 Y
4 Y
5 Y
6 Y
Enter Filter Rule Number (1-6) to Configure:
Menu 21 - Filter Set Configuration
Filter
Set #
------
1
2
3
4
5
6
Comments
------------------
______________
______________
______________
______________
______________
______________
Filter
Set #
------
7
8
9
10
11
12
Comments
------------------
______________
______________
______________
______________
______________
______________
Enter Filter Set Number to Configure= 0
Edit Comments=
Press ENTER to CONFIRM or ESC to CANCEL: