Filter
Top Products
8–16
Remote configuration control:
S37 Bit-mapped register;
Default: 0 For remote configuration using the panel menu: (See *W
ab
, *R
ab
)
S38 Bit-mapped register, default: 0:
*. Remote digital loopback request must also be granted. (AT&T4).
Code Bits Bin. Dec. Description
(4,3,2) Reserved.
*Wab (1) 0 0 Writes from the local profile
a
to the remote
profile
b
.
*Rab 1 2 Reads from the remote profile
b
to the local
profile
a
.
*F1 (0) 0 0 Denies remote request for configuration.
*F0 1 1
*
Grants remote request for configuration.
Code Bits Dec. Description
(7 to 4) 0 to 5 Local profile number.
(3 to 0) 0 to 5 Remote profile number.
Note: 0 through 3 are profiles 0 to 3, 4 is the current profile, and 5 is the
factory default (4 and 5 are read-only).
Note: When using the LCD panel for remote configuration, set S36b1
and S37 first, then activate it in the DIAGNOSTIC menu.
Code Bits Bin. Dec. Description
(7, 6) Reserved.
(5) 1 32 Disables MNP5 negotiation regardless of
error control setting.
(4) 0 0 Multi-Auto answer with fax answering ena-
bled. (Default)
1 16 Disables fax answering in Multi-Auto mode.
Hangs up if a fax call is received.