Filter
Top Products
8–4
S7 60 0 255 Sets the number of seconds the modem
will wait for a carrier. If the modem does
not detect a carrier within this time limit,
it hangs up and returns the
NO CARRIER result code.
S8 2 0 255 Sets the duration of delay generated by
the comma (,) dial modifier. Also sets the
pause between command re-execution
for the repeat (>) command.
S9 6 0 255 Sets the duration, in tenths of a second,
that the remote modem's carrier signal
must be present before recognition.
When in non-FSK or half-duplex opera-
tion, the modem ignores the setting of
this register.
S10 7 0 255 Sets the duration, in tenths of a second,
that the modem will wait after loss of car-
rier before hanging up. This guard time
allows the modem to distinguish between
a line hit, or any other cause that
momentarily breaks the connection, and
a true disconnection (hanging up) by the
remote modem.
S11 70 0 255 Sets the duration and spacing, in milli-
seconds, in touch-tone dialing.
Note: The numerical values of the ASCII codes are always given as deci-
mals. If you enter values from the LCD front panel, you must con-
vert these values to hexadecimal (hex) values.
Register
Default Min. Max. Description