Filter
Top Products
5–4
Dial Memory
The first menu of the dialing directory is DIAL MEMORY. Pressing the ENTER key will
cause the following screen to appear:
The first stored number shown on the menu is the default dial number which can
be selected from the DEFAULT DIAL menu. By pressing the left or right arrow key,
you can view up to 50 different numbers stored in the memory. Pressing the ENTER
key will cause the selected number to be dialed. The first line of the LCD can display
up to 16 characters. However, up to 25 characters can be entered. Characters 17
through 25 are displayed on the second line of the LCD display.
Storing a Number
Pressing the right arrow key from the DIAL MEMORY display will move the menu to
STORE NUMBER. Pressing the ENTER key at this point will produce the following
screen display:
Just like DIAL MEMORY, up to 50 different numbers can be viewed and set. If you
want to add a number to the memory, select an unused memory location and press
Equivalent AT Commands
AT&Z? View all stored phone numbers.
ATDSn n = 0 - 49; dial stored number.
Equivalent AT Commands
AT&Z? View all stored phone numbers.
AT&Zn=1234567 Store phone number in memory location n (n=0-49).
#01: 1234567
<< >> SELECT MEMORY
<ENTER>
Dial out the number
# 00:
<< >> SELECT MEMORY
Changing an existing number
<ENTER>
# 00:
<< >> SELECT DIGIT
# 00:1234567
<< >> SELECT MEMORY
<ENTER>
# 00:
<< >> SELECT DIGIT