Filter
Top Products
15–12
Class 2.0 Command Responses
Response
Value Function and Description
+FCI:"CSI ID
string"
Reports remote ID response, Called Station ID
(CSI).
+FCO Fax connection established response.
+FCS: vr, br, wd, ln,
df, ec, bf, st
Negotiated session parameters (DCS frame infor-
mation) response: refer to the +FIS=… command
for a description of subparameters.
+FET:<ppm> Post page message response:
ppm=0 Another page next, same document.
ppm=1 Another document next.
ppm=2 No more pages of documents.
ppm=3 Another page next, same document, procedure
interrupt requested.
ppm=4 Another document next, procedure interrupt
requested.
ppm=5 No more documents or pages, procedure inter-
rupt requested.
+FHS:<hsc> Call termination status:
hsc=
0-0F
Call placement and termination. Refer to
TIA-592 for details.
hsc=
10-1F
Transmits phase A and miscellaneous errors.
Refer to TIA-592 for details.
hsc=
20-3F
Transmits phase B hang up codes. Refer to
TIA-592 for details.
hsc=
40-4F
Transmits phase C hang up codes. Refer to
TIA-592 for details.
hsc=
50-6F
Transmits phase D hang up codes. Refer to
TIA-592 for details.
hsc=
70-8F
Receives phase B hang up codes. Refer to
TIA-592 for details.
hsc=
90-9F
Receives phase C hang up codes. Refer to
TIA-592 for details.
hsc=
A0-BF
Receives phase D hang up codes. Refer to
TIA-592 for details.
+FIS:vr, br, wd, ln
df, ec, bf, st
Remote fax station capabilites (DIS frame infor-
mation) response: refer to the +FIS=... com-
mand for a description of subparameters.