Filter
Top Products
8–6
S16 Test status register; default: 0:
Z1 001 32 Profile 1 as active settings; also active after
the next power turn-on.
Z2 010 64 Profile 2 as active settings; also active after
the next power turn-on.
Z3 011 96 Profile 3 as active settings; also active after
the next power turn-on.
Z4 100 128 Profile 4 as active settings; also active after
the next power turn-on. (Default)
*C0 (4,3) 00 0 10-bit character length. (Default)
*C1 01 8 11-bit character length.
*C2 10 16 9-bit character length.
*C3 11 24 8-bit character length.
Note: Character length includes start bit, data bits, parity, and stop bit(s).
Code
Bits Bin. Dec. Description
(2) 0 0 1 stop bit. (Default)
1 4 2 stop bits.
(1,0) 00 0 Even parity.
01 1 Odd parity.
10 2 No parity. (Default)
Code
Bits Bin. Dec. Description
&T0 0 No test is in progress. (Default)
&T1 1 Analog loopback test is in progress.
&T2 2 Reserved.
&T3 3 Local digital loopback test is in progress.
&T6 6 Remote digital loopback test is in progress.
&T7 7 Remote digital loopback with self-test is in
progress.
&T8 8 Analog loopback with self-test is in progress.
Note: This S-register may not be set directly and may not be read while a
test is in progress. Use the AT&Tn command codes.
Code
Bits Bin. Dec. Description