Filter
Top Products
Chapter 46 Access Control
XGS-4526/4528F/4728F User’s Guide
400
46.3.3 SNMP Traps
The Switch sends traps to an SNMP manager when an event occurs. The following
tables outline the SNMP traps by category.
An OID (Object ID) that begins with “1.3.6.1.4.1.890.1.5.8” is defined in private
MIBs. Otherwise, it is a standard MIB OID.
The OIDs beginning with “1.3.6.1.4.1.890.1.5.8.52” are specific to the XGS-
4526 switch.
The OIDs beginning with “1.3.6.1.4.1.890.1.5.8.39” are specific to the XGS-
4528F switch.
The OIDs beginning with “1.3.6.1.4.1.890.1.5.8.46” are specific to the XGS-
4728F switch.
Table 146 SNMP System Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
coldstart coldStart 1.3.6.1.6.3.1.1.5.1 This trap is sent when the
Switch is turned on.
warmstart warmStart 1.3.6.1.6.3.1.1.5.2 This trap is sent when the
Switch restarts.
fanspeed FanSpeedEventOn 1.3.6.1.4.1.890.1.5.8.52.3
1.2.1
1.3.6.1.4.1.890.1.5.8.39.3
1.2.1
1.3.6.1.4.1.890.1.5.8.46.3
1.2.1
This trap is sent when the fan
speed goes above or below the
normal operating range.
FanSpeedEventClear 1.3.6.1.4.1.890.1.5.8.52.3
1.2.2
1.3.6.1.4.1.890.1.5.8.39.3
1.2.2
1.3.6.1.4.1.890.1.5.8.46.3
1.2.2
This trap is sent when the fan
speed returns to the normal
operating range.