Filter
Top Products
Chapter 46 Access Control
XGS-4526/4528F/4728F User’s Guide
413
46.5 SSH Overview
Unlike Telnet or FTP, which transmit data in clear text, SSH (Secure Shell) is a
secure communication protocol that combines authentication and data encryption
to provide secure encrypted communication between two hosts over an unsecured
network.
Figure 222 SSH Communication Example
Edit Logins
You may configure passwords for up to four users. These users have read-only access.
You can give users higher privileges via the CLI. For more information on assigning
privileges see the Ethernet Switch CLI Reference Guide.
User Name Set a user name (up to 32 ASCII characters long).
Password Enter your new system password.
Retype to
confirm
Retype your new system password for confirmation
Apply Click Apply to save your changes to the Switch’s run-time memory.
The Switch loses these changes if it is turned off or loses power, so
use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 154 Management > Access Control > Logins (continued)
LABEL DESCRIPTION