Filter
Top Products
AES-100 User’s Guide
6-2 Bridge Configuration
- Bridge port 9 (ADSL port 8) allowed to bridge port 1 (Ethernet port) only
It is recommended that you do not alter these settings, or the AES-100 may not work correctly.
The default VLAN settings allow each ADSL port to communicate back and forth with only the Ethernet port,
and not with other ADSL ports. The following figure illustrates this.
Figure 6-1 Default VLAN Settings
6.3 Bridge Commands
6.3.1 Device Command
Syntax:
device
The device command shows information on all bridge ports.
6.3.2 Filter Command
Syntax:
filter
The filter command displays the filtering database.
6.3.3 Filterage Command
Syntax:
filterage [age]
where
age = aging out timer period in seconds