Filter
Top Products
AES-100 User’s Guide
10-2 Firmware Upload
Step 2. Connect your AES-100’s console port to a computer’s serial port with an RS-232 cable.
Step 3. Run any terminal emulation program, e.g., Windows’ built-in HyperTerminal, with the following
parameters:
- VT100 terminal emulation
- 9600 bps
- No parity, 8 data bits, 1 stop bit
- No flow control
Step 4. Run BootpTftp.exe, to bring up the following window.
Figure 10-1 BOOTP/TFTP Server