Filter
Top Products
AES-100 User’s Guide
Bridge Configuration 6-3
The filterage command sets or shows the aging out timer period of the filtering database. It is recommended
that you use the default setting. If the time interval is reduced to a setting that is too short, it could increase
broadcast traffic and reduce the available bandwidth.
6.3.4 Flush Command
Syntax:
flush [port]
where
[port] = bridge port number, from 1 to 9
The flush command flushes out the filtering database of the specified bridge port. If the <port> field is omitted,
this command will flush out the filtering databases of all ports.
6.3.5 Info Command
Syntax:
info
The info command shows the software number of the bridge implementation and the maximum size of the
filtering database.
6.3.6 Status Command
Syntax:
status
The status command displays the bridge status.
6.4 Port-Based VLAN Commands
6.4.1 Portfilter Command
Syntax:
portfilter [<source port> all|<dest ports>]
where
<source port> = incoming bridge port number, from 1 to 9
all = all bridge ports are allowed outgoing ports
<dest ports> = the allowed outgoing bridge port number, separate by a space if there is more than one port