Filter
Top Products
AES-100 User’s Guide
Firmware Upload 10-3
Step 5. Click the New button to create a MAC address entry. The Input Box window will pop up as shown next.
Step 6. Input the MAC address of the AES-100 and then click OK. You can find the MAC address of the AES-
100 on its boot console.
Figure 10-2 Input MAC
Step 7. Set up the host address (the IP address you want to assign to the AES-100), server address (the IP
address of this computer), net mask, gateway and filename (the new firmware name). Click Update
Database.