Filter
Top Products
AES-100 User’s Guide
10-4 Firmware Upload
Figure 10-3 Database Edit Dialog
Step 8. Choose Normal Bootp to enable normal BOOTP/TFTP functions.
Figure 10-4 Enable BOOTP/TFTP
Step 9. Restart the AES-100 and press any key within three seconds to get the following console window:
Figure 10-5 Enter Debug Mode
Step 10. Enter atnb at the AES-100 boot console.
Step 11. Wait for the firmware upload to finish.
Step 12. Use the following command sequence on the AES-100 to write new firmware to flash memory.
- 192.168.1.1> flashfs
- 192.168.1.1 flashfs> wipe
- 192.168.1.1 flashfs> update
Wait for the update to complete and then restart the AES-100.
SDRAM Testing . . .
AES-100 Boot Loader, Feb 7 2001 12:06:03
Copyright © 2001 ZyXEL Communications Corp.
Mac address 00:A0:C5:12:34:56