Filter
Top Products
AES-100 User’s Guide
6-4 Bridge Configuration
The portfilter command sets or displays the port-based VLAN configuration.
An example is shown next.
192.168.1.1 > bridge
192.168.1.1 bridge> portfilter
Port 1 (edd): all
Port 2 (bun/port=atm:0/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 3 (bun/port=atm:1/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 4 (bun/port=atm:2/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 5 (bun/port=atm:3/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 6 (bun/port=atm:4/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 7 (bun/port=atm:5/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 8 (bun/port=atm:6/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 9 (bun/port=atm:7/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
The above shows the current configuration of the port-based VLAN. It is the same as the default settings.
An example with an altered configuration is shown next.
192.168.1.1 > bridge
192.168.1.1 bridge> portfilter 2 1 3
192.168.1.1 bridge> portfilter 3 1 2
This example sets the allowed outgoing bridge ports of port 2 (ADSL port 1) to port 1 (Ethernet port) and port 3
(ADSL port 2). The allowed outgoing bridge ports of port 3 (ADSL port 2) are set to port 1 (Ethernet port) and
port 2 (ADSL port1). This way ASDL ports 2 and 3 can communicate with each other and the Ethernet port. You
can see the effects of this example by using the following command:
192.168.1.1 bridge> portfilter
Port 1 (edd): all
Port 2 (bun/port=atm:0/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1 3
Port 3 (bun/port=atm:1/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1 2
Port 4 (bun/port=atm:2/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 5 (bun/port=atm:3/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 6 (bun/port=atm:4/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 7 (bun/port=atm:5/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 8 (bun/port=atm:6/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1
Port 9 (bun/port=atm:7/rfc1483=true/txvpi=0/txvci=33/rxvpi=0/rxvci=33): 1