Filter
Top Products
RIP Configuration Commands 153
Use the filter-policy import command to configure the switch to filter global
routing information.
Use the undo filter-policy import command to disable filtering of received
global routing information.
By default, RIP does not filter the received routing information.
Related commands: acl, filter-policy export, ip ip-prefix.
Example
To configure the filtering of the global routing information using acl 2000, enter
the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]rip
[4500-rip]filter-policy 2000 import
host-route Syntax
host-route
undo host-route
View
RIP view
Parameter
None
Description
Use the host-route command to configure RIP to accept host routes. This is the
default.
Use the undo host-route command to configure RIP to reject host routes.
Example
To configure RIP to reject a host route, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]rip
[4500-rip]undo host-route
import-route Syntax
import-route protocol [ cost value | route-policy route-policy-name
]
undo import-route protocol
View
RIP view