Filter
Top Products
Configuration File Management Commands 313
Generally, this command is used in the following situations:
■ After upgrade of software, configuration files in flash memory may not match
the new version's software. Perform
reset saved-configuration command
to erase the old configuration files.
■ When a Switch 4500 is reused on a network but in a different manner to
previously, the original configuration file should be erased and the switch
reconfigured.
If the configuration files do not exist in the flash memory when the Switch is
powered on and initialized, it will choose the default setting automatically.
Related commands: save, display current-configuration, display
saved-configuration
.
Example
Erase the configuration files from the flash memory of the Switch.
<4500>reset saved-configuration
The saved configuration will be erased.
Are you sure?[Y/N]y
Configuration in flash memory is being cleared.
Please wait ...
..
Configuration in flash memory is cleared.
<4500>
save Syntax
save [ filename | safely ]
View
Any view
Parameter
file-name: the name of the configuration file. It is a character string of 5 to 56
characters.
safely: save the configuration file in safely mode.
Description
Use the save command, to save the current configuration files to flash memory.
After finishing a group of configurations and achieving corresponding functions,
get the current configuration files stored in the flash memory.
After a fabric is formed, if you execute the save command, every switch in the
fabric saves the current configurations to its individual configuration file.
If you do not enter the file-name parameter in this command, for the switches that
have specified the configuration file for booting by startup saved-configuration
command, the current configurations will be stored to the specified configuration
file; and for the switches that have not specified the configuration file for booting,
the current configurations will be stored to the default configuration file,
4500cfg.cfg.