Filter
Top Products
28 CHAPTER 1: USING SYSTEM ACCESS COMMANDS
Parameter
minutes: Enter the number of minutes you want to allow a user interface to
remain idle before it is disconnected. This can be in the range 0 to 35791.
seconds: Enter the number of seconds in addition to the number of minutes.
Optional.
Description
Use the idle-timeout command to configure the amount of time you want to
allow a user interface to remain idle before it is disconnected. Use the
undo
idle-timeout
command to restore the default idle-timeout. By default,
idle-timeout is set to 10 minutes.
To disable idle timeout, set the idle-timeout value to 0.
Example
To configure the timeout value to 1 minute on the AUX user interface, enter the
following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]user-interface aux 0
[4500-ui-aux0]idle-timeout 1
language-mode Syntax
language-mode { chinese | english }
View
User View
Parameter
chinese: Sets the language of the command line interface to Chinese.
english: Sets the language of the command line interface to English.
Description
Use the language-mode command to choose the language of the command line
interface. By default, the command line interface is set to English.
Example
To change the command line interface from English to Chinese, enter the
following:
<4500-ui-aux0>language-mode chinese
lock Syntax
lock
View
User View