Filter
Top Products
AAA and RADIUS Configuration Commands 255
mac mac-address: Specifies the MAC address of a user. Where, mac-address
takes on the hexadecimal format of HHHH-HHHH-HHHH-HHHH.
idle-cut second: Allows/disallows the local users to enable the idle-cut
function. (The specific data for this function depends on the configuration of the
ISP domain where the users are located.) The argument
minute defines the
idle-cut time, which is in the range of 60 to 7200 seconds.
access-limit max-user-number: Specifies the maximum number of users who
access the device using the current user name. The argument
max-user-number is
in the range of 1 to 1024.
vlan vlanid: Sets the VLAN attribute of user, in other words, the VLAN to which
a user belongs. The argument
vlanid is an integer in the range of 1 to 4094.
location: Sets the port binding attribute of user.
nas-ip ip-address: The IP address of the access server in the event of binding a
remote port with a user. The argument
ip-address is an IP address in dotted
decimal format and defaults to 127.0.0.1.
port portnum: Sets the port to which a user is bound. The argument portnum is
represented by “SlotNumber SubSlotNumber PortNumber”. If any of these three
items is absent, the value 0 will be used to replace it.
Description
Use the attribute command to configure some attributes for specified local user.
Use the
undo attribute command to cancel the attributes that have been
defined for this local user.
It should be noted that the argument nas-ip must be defined for a user bound
with a remote port, which is unnecessary, however, in the event of a user bound
with a local port.
Related command: display local-user.
Example
To configure the IP address 10.110.50.1 to the user JohnQ, enter the following:
<4500> system-view
System View: return to User View with Ctrl+Z.
[4500]local-user JohnQ
New local user added.
[4500-luser-JohnQ]ip 10.110.50.1
cut connection Syntax
cut connection { all | access-type { dot1x | mac-authentication } |
domain domain-name | interface interface-type interface-number | ip
ip-address | mac mac-address | radius-scheme radius-scheme-name |
vlan vlanid | ucibindex ucib-index | user-name user-name }
View
System View