Filter
Top Products
802.1x Configuration Commands 237
Configuration: Transmit Period 30 s, Handshake Period 15 s
Quiet Period 60 s, Quiet Period Timer is disabled
Supp Timeout 30 s, Server Timeout 100 s
The Max-Req 3
Total maximum 802.1x user resource number is 1024
Total current used 802.1x resource number is 0
Ethernet1/0/1 is link-up
802.1X protocol is disabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
The port is a(n) authenticator
Authentication Mode is Auto
Port Control Type is Mac-based
Max number of on-line users is 256
… (Omitted)
dot1x Syntax
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
View
Ethernet Port View
Parameter
interface interface-list: Ethernet port list including several Ethernet ports.
interface-list = { interface-num [ to interface-num ] } & < 1-10 >.
interface-num
specifies a single Ethernet port in the format interface-num = {
interface-type interface-num | interface-name }
, where interface-type
specifies the port type,
interface-num specifies the port number and
interface-name specifies the port name. For the respective meanings and value
ranges, read the Parameter of the Port Configuration section.
Description
Use the dot1x command to enable 802.1x on the specified port or globally, (that is
on the current device). Use the
undo dot1x command to disable the 802.1x on
the specified port or globally.
By default, 802.1x is disabled on all the ports and globally on the device.
This command is used to enable the 802.1x on the current device or on the
specified port. When it is used in System View, if the parameter
ports-list is not
specified, 802.1x will be globally enabled. If the parameter
ports-list is
specified, 802.1x will be enabled on the specified port. When this command is
used in Ethernet Port View, the parameter interface-list cannot be entered and
802.1x can only be enabled on the current port.
The configuration command can be used to configure the global or port 802.1x
performance parameters before or after 802.1x is enabled. Before 802.1x is