Filter
Top Products
66 CHAPTER 2: USING PORT COMMANDS
interface_name: Specifies port name, in the format of interface_name =
interface_type interface_num.
interface_type: Specifies port type and interface_num port number.
For more information, see the parameter item for the interface command.
actor-churn: Debugging actor-churn state machine.
mux: Debugging MUX state machine.
partner-churn: Debugging partner-churn state machine.
ptx: Debugging PTX state machine.
rx: Debugging RX state machine.
all: Debugging all state machines.
Description
Use the debugging lacp state command to enable LACP state machines
debugging on a designated port or ports. Use the
undo debugging lacp state
command to disable LACP state machines debugging on a designated port or
ports.
Example
To enable all LACP state machines debugging.
<4500>debugging lacp state all
display link-aggregation
summary
Syntax
display link-aggregation summary
View
Any view
Parameter
None
Description
Use the display link-aggregation summary command to view summary
information of all aggregation groups, including actor system ID, aggregation
group ID, aggregate group type, partner system ID, number of selected ports,
number of standby ports, load sharing type and master port number.
Example
To display summary information of all aggregation information, enter the
following:
<4500>display link-aggregation summary
Aggregation Group Type: D -- Dynamic, S -- Static, M -- Manual
Loadsharing Type: Shar – Loadsharing, NonS – Non-Loadsharing
Actor ID: 0x8000, 00e0-fcff-ff04