Filter
Top Products
FTP Server Configuration Commands 315
Parameter
cfgfile: The name of the configuration file. It is a string with a length of 5 to 56
characters.
Description
Use the startup saved-configuration command to configure the configuration
file used for enabling the system for the next time.
The configuration file must have ".cfg" as its extension name and must be saved
under the root directory of the Flash.
For the related command, please see display startup
Example
Configure the configuration file for the next start-up.
<4500>startup saved-configuration 4500cfg.cfg
Please wait............Done!
<4500>
%Apr 2 01:24:57:661 2000 3Com CFM/3/CFM_LOG:- 1 -Unit1 set the
configuration successfully.
FTP Server
Configuration
Commands
This section describes how to use the File Transfer Protocol (FTP) configuration
commands on your Switch 4500.
display ftp-server Syntax
display ftp-server
View
All views
Parameter
None
Description
Use the display ftp-server command to display the parameters of the current
FTP Server. You can perform this command to verify the configuration after setting
FTP parameters.
Example
Display the configuration of FTP Server parameters.
<4500>display ftp-server
Ftp server is running
Max user number 1
User count 0
Timeout(minute) 30
<4500>
display ftp-user Syntax
display ftp-user