Filter
Top Products
Log Commands 361
Log Commands This section displays the logging options available on your Switch 4500.
display channel Syntax
display channel [ channel-number | channel-name ]
View
All views
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, the system has
ten channels.
channel-name: Specify the channel name, the name can be console, monitor,
loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7,
channel8, channel9. Where console is channel 0, monitor is channel 1, loghost
is channel 2, trapbuffer is channel 3, logbuffer is channel 4 and snmpagent is
channel 5.
Description
Use the display channel command to display the details about the information
channel.
Without a parameter, the display channel command shows the configurations
of all the channels.
Example
Show details about the information channel 0.
<SW4500>display channel 0
channel number:0, channel name:console
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y warning Y debugging Y debugging
display info-center Syntax
display info-center
View
All views
Parameter
None
Description
Use the display info-center command to display the configuration of system
log and the information recorded in the memory buffer.
If the information in the current log/trap buffer is less than the specified sizeval,
display the actual log/trap information.