Filter
Top Products
SEC TION 1
INSTALLATION
1.1 UNPACKING PROCEDURE
1. Remove the instrument from its packing. The instrument is supplied with a
panel gasket and push-fit fixing strap. Retain the packing for future use,
should it be necessary to transport the instrument to a different site or to
return it to the supplier for repair/testing.
2 . Examine the delivered items for damage or deficiencies. If any is found,
notify the carrier immediately.
1.2 PANEL-MOUNTING
The panel on which the instrument is to be mounted must be rigid and may be up to
6.0mm (0.25 inches) thick. The cut-out required for a single Digital Indicator is as
shown in Figure 1-1.
The Digital Indicator is 100mm deep (measured from the rear face of the front panel).
The front panel is 48mm high and 96mm wide. When panel-mounted, the front panel
projects 10mm from the mounting panel. The main dimensions of the instrument are
shown in Figure 1-2.
SM067-1 November, 2000 1-1
59039
1
8
-DIN Digi tal In di ca tor Sec tion 1
Prod uct Man ual - Vol ume II In stal la tion
Figure 1-1 Cut- out Di men sions
92mm
+0.5 - 0.0
45mm
+0.5 - 0.0