Filter
Top Products
CLI Commands B-25
set dhcp relay server2 ■ address <IP_address>
■ enabled [YES | NO]
■ max_hops <number>
Defines the address and characteristics of the secondary DHCP Server over the
WAN that should receive our relayed DHCP requests.
set dhcp server ■ DNS1 <IP_address>
■ DNS2 <IP_address>
■ domain <string>
■ end_address <IP_address >
■ hostname <string>
■ lease <seconds>
■ mask <IP_address>
■ router <IP_address>
■ start_address <IP_address>
■ WINS1 <IP_address>
■ WINS2 <IP_address>
Defines the characteristics of the DHCP Server and defines the pool of addresses
that this facility should administer.
enabled Whether or not this server is active for relay.
max_hops maximum number of hops the redirected requests are allowed to accrue
without the request being dropped.
Parameters Description
address IP address of the secondary DHCP server over the WAN port where DHCP
resolution requests should be forwarded.
enabled Whether or not this server is active for relay.
max_hops maximum number of hops the redirected requests are allowed to accrue
without the request being dropped.
Parameters Description
DNS1 IP address of the primary DNS server that the DHCP server will utilize when
resolving names.
DNS2 IP address of the secondary DNS server that the DHCP server will utilize when
resolving names.
domain Name of the DNS domain we exist in.
end_address Last IP address in the pool of IP addresses that will be handed out through
DHCP.
hostname DNS hostname of this unit.
lease The number of seconds that an IP address will be allocated to a workstation
without having to be renewed.