Filter
Top Products
4-4 CHAPTER 4: QUICK SETUP
You need to specify the framing for the IP network. It should be either
"ethernet_ii" or "snap".
You can use the Routing Information Protocol (RIP) to exchange routing
information with other routers on the network.
The OfficeConnect Remote 812 can act as a DHCP server, providing IP addresses to
other stations on the local lan.
It is possible to restrict access to the TFTP server to a specific system or a list of
systems. Quick Setup will allow you to enter one system that is allowed or allow
access to all systems.
IP setup is completed.
Quick Setup IPX information
The network name is used by the OfficeConnect Remote 812 to identify your IPX
network.
Question Default Your System
What should the the mask be set to? [C]
Question Default Your System
What is the framing for the IP network? [ethernet_ii]
Question Default Your System
Do you want to run RIP? [yes]
Choose the version of RIP to run: [v2]
Question Default Your System
Do you want the OfficeConnect Remote 812 to act
as a DHCP server?
[yes]
Enter the start address for the DHCP IP address
pool:
[ ]
Enter the end address for the DHCP IP address
pool:
[ ]
Question Default Your System
Do you want to allow all systems to access the TFTP
server?
[yes]