Filter
Top Products
CLI Commands B-5
add ipx service
[service_name]
■ address [internal network number]
■ gateway [network_number.mac_address]
■ metric [metric]
■ node [internal_node_number]
■ socket [socket_number]
■ type [service_type]
Adds a static IPX service (for the LAN) to the IPX services table. You must supply
the name, internal ipx network number, node number, socket, and type of service
for this service. The user must also supply gateway information to indicate the
next router hop. To remove this service, use the delete ipx service command.
Below is a partial list of the IPX services available:
Parameters Description
service name Designation of IPX service.
address Internal network number for the IPX service on which this service resides.
Gateway Address of the router you defined as the gateway.
metric An integer representing how far away the default router is, in “hops” through
other routers. Values: 1-15.
node The internal MAC address of the server on which the service resides. This is
typically 00:00:00:00:00:01.
type Type of service: hex number referring to file server, print server, etc. Refer to
the table below.
socket Socket number that the service uses.
Type Description
04 file server
05 job server
07 print server
09 archive server
0A job queue
21 NAS SNA gateway
2E dynamic SAP
47 advertising print server
4B Btrieve VAP 5.0
4C SQL VAP
7A TES-NetWare VMS
98 NetWare access server
9A Named Pipes server
9E PortableNetWare-UNIX
107 NetWare 386
111 Test server
166 NetWare management
26A NetWare management
26B Time synchronization