Filter
Top Products
B-46 APPENDIX B: CLI COMMAND DESCRIPTION
■ Frame Type - frame type used by the interface (ETHERNET II, SNAP, or
LOOPBACK)
■ Maximum Packet Size - maximum allowable packet size for this IPX
network. Default is 1500.
■ Status - operational state of the network
■ Network Delay (ticks) - time in number of ticks it takes to reach this IPX
network
■ Network Learning Retries - number of times this network will resend
packets to discover its directly connected neighbors
■ Diagnostics - sending of diagnostic packets ENABLED or DISABLED
■ NetBIOS - support ENABLED or DISABLED
■ NetBIOS Name Caching - support ENABLED or DISABLED
■ NetBIOS Cache Timer (sec) - interval a NetBIOS system will be kept in the
cache
■ NetBIOS Maximum Hops - most hops this network will make to locate a
NetBIOS system
■ RIP - RIP status
■ RIP Update (sec) - number of seconds to wait before aging out RIP entries
■ RIP Age Multiplier - number to multiply the rip_update_interval by, to
obtain the value for aging out the entries in the RIP database
■ RIP Max Packet Size - largest allowable size of a RIP packet
■ SAP - SAP state
■ SAP Update (sec) - number of seconds to wait before aging out SAP
entries
■ SAP Age Multiplier - number to multiply the sap_update_interval by, to
obtain the value for the aging out entries in the SAP database
■ SAP Packet Size - greatest allowable size of a SAP packet
■ SAP Nearest Server Reply - SAP seeks nearest neighbors, YES or NO
show ipx rip ■ settings
■ counters
Displays information about RIP for IPX.
show ipx sap ■ settings
■ counters
Parameters Description
settings Displays the state of the IPX routing. This is ON or OFF.
counters Displays the Incorrect RIP Packets for the IPX routing. The incorrect RIP
packets are the number of RIP packets that do not make sense.