Filter
Top Products
B-48 APPENDIX B: CLI COMMAND DESCRIPTION
■ Number Active Links - sum of active links using this PPP bundle
■ Transmit Packets - sum of packets transmitted over this bundle
■ Bytes from Upper Layer - sum of bytes received from an upper layer
application for transmission over this bundle. This counter represents all
data handed down to the PPP application BEFORE compression occurs.
■ Bytes to Lower Layer - sum of bytes sent to a lower layer application for
transmission over this bundle. This counter represents all data to be handed
down to the lower layer application AFTER compression occurs.
■ Received Packets - sum of packets received from a lower layer application
over this bundle
■ Bytes to Upper Layer - sum of bytes to be handed up to an upper layer
application over this bundle
■ Bytes from Lower Layer - sum of bytes received from a lower layer
application over this bundle
■ Total Bad Headers - sum of packets with incorrect PPP Header (Address,
Control, PID Field)
COUNTERS for PPP LINK 1 - 5
■ Operational Status - not opened or opened
■ Received Packets - too long
■ Transmit Frames - sum of frames received from the PPP application for
transmission over this link
■ Bytes from Upper Layer - sum of bytes handed down from an upper layer
application for this link
■ Bytes to Lower Layer - sum of bytes received from a lower layer
application for this link
■ Received Frames - sum of frames received on this link
■ Bytes to Upper Layer - sum of bytes handed up to an upper layer
application over this link
■ Bytes from Lower Layer -sum of bytes received from a lower layer
application over this link
show ppp on interface
<name> settings
Displays the settings for PPP on the specified WAN interface.
SETTINGS for PPP BUNDLE 1
■ Operational Status - opened or not opened
■ Number Active Links - number of links active on this PPP bundle
■ User Profile - user whose parameters were used in creating links
■ Local MMRU - MRU the remote entity uses when sending packets to local
PPP entity. Default: 1514
■ Remote MMRU - MRU the local entity uses when sending packets to
remote PPP entity. Default: 1514
■ Local Endpoint Class - type of address used as the identifier