Filter
Top Products
CLI Commands B-45
INPUT COUNTERS
■ Total Packets Received - sum of IPX packets received
■ Header Errors - sum of incoming packets discarded due to errors in their
headers, including any IPX packet sized less than a minimum of 30 bytes
■ Unknown Sockets - sum of incoming packets discarded because the
destination socket was not open
■ Discarded - sum of incoming packets discarded due to reasons other than
those accounted for by Header Errors, and Unknown Sockets
■ Checksum Errors - sum of IPX packets received with wrong checksums
■ Delivered Locally - sum of IPX packets delivered locally, including packets
from local applications
■ No Route to Destination - number of times no route to a destination was
found
■ Too Many Hops - sum of incoming packets discarded for exceeding the
hop count
■ Filtered Out - sum of incoming packets filtered out
■ Decompression Errors - sum of incoming packets discarded due to
compression errors
OUTPUT COUNTERS
■ Total Packets Transmitted - sum of IPX packets transmitted
■ Forwarded Packets - sum of IPX packets forwarded
■ Local Transmits - sum of IPX packets transmitted to local hosts
■ Local Malformed Transmits -
■ Discarded - sum of outgoing packets discarded
■ Filtered Out - sum of packets filtered out before transmission
■ Compression Errors - sum of outgoing packets discarded due to
compression errors
■ Socket Open Failures - sum of outgoing packets discarded because a
socket was not available
show ipx network
<network_name>
counters
Displays statistics for the specified IPX network.
■ RIP Out Packets - sum of RIP packets transmitted
■ RIP In Packets - sum of RIP packets received
■ SAP Out Packets - sum of SAP packets transmitted
■ SAP In Packets - sum of SAP packets received
show ipx network
<network_name>
settings
Displays parameter settings for the specified IPX network. You can modify most of
these values using the set ipx network command.
■ Interface - interface this IPX network uses
■ Network Address - network address of this IPX network