Filter
Top Products
CLI QuickVC Setup Script 5-5
Category of Service: UBR
Peak Cell Rate: 0
IP: Enabled
Local WAN IP Address: Learned
Remote WAN IP Address: Learned
WAN Interface Type: Numbered
Address Translation (NAT): Enabled
RIP: no
Remote is Default Gateway: yes
IPX: Enabled
IPX WAN Network Number: Learned
IPX WAN RIP: Yes
Bridging: Enabled
Sample Output Display
as Quick Setup Executes
OCR-DSL> add vc “name”
OCR-DSL>set vc “name” ip disable ipx disable bridging disable
OCR-DSL>set vc “name” network_service ppp
OCR-DSL>set vc “name” atm vpi 0 vci 0 category_of_service unspecified pcr 0
OCR-DSL>set vc “name” ip enable
OCR-DSL>set vc “name” remote_ip_address 0.0.0.0/C
OCR-DSL>set vc “name” local_ip_address 0.0.0.0
OCR-DSL>set vc “name” ip_routing listen rip ripv2
OCR-DSL>set vc “name” nat_option enable
OCR-DSL>set vc "name" ipx enable
OCR-DSL>set vc "name" ipx_enable ipx_address 00000000 ipx_routing all
OCR-DSL>set vc “name” bridging enable
OCR-DSL>
OCR-DSL>enable vc “name”
OCR-DSL>_save users
_SAVE USERS Complete
OCR-DSL>Spawned Process CFP 272016 /./QuickSetup.commands Completed
Successfully
OCR-DSL>
h
Question Default Your System
Do you want to change any answers ? [no]
Do you want to actually execute these commands? [yes]