Filter
Top Products
B-30 APPENDIX B: CLI COMMAND DESCRIPTION
set ipx system ■ priority [priority level]
■ default_gateway [ipx_host_add]
■ initial_pool_address [ipx_addr]
■ pool_members [number]
Sets parameters for dynamic IPX networks.
set network service
<admin_name>
■ server_type [server_type]
■ socket [socket_number]
■ data [“string”]
■ close_active_connections [TRUE | FALSE]
Sets parameters for configured network services. You can list the configured
network services using list network services. The service must be disabled for this
command to work.
netbios Whether to support NetBIOS on dial-out IPX networks.
netbios_name_cache Whether or not to cache a list of the other NetBIOS systems on this
IPX network.
netbios_cache_timer How long a NetBIOS system will be kept in the cache.
netbios_max_hops Maximum number of hops this network will make to locate a
NetBIOS system.
packet_maximum_size Maximum size packet that this IPX network will support.
rip Sets the RIP mode.
rip_age_multiplier Number to multiply the rip_update_interval by, to obtain the value
for the aging out the entries in the RIP database.
rip_packet_size Size of RIP packets.
rip_update_interval How often RIP should send periodic updates.
sap Sets the SAP mode.
sap_age_multiplier Number to multiply the sap_update_interval by, to obtain the value
for aging out entries in the SAP database.
sap_packet_size Size of SAP packets.
sap_nearest_replies Whether or not SAP will look its nearest neighbors.
sap_update_interval How often RIP should send periodic updates.
Parameters Description
priority Priority for the dynamic IPX network.
default_gateway Default router for the dynamic IPX network.
initial_pool_address Initial IPX address used to dynamically assign IPX network.
pool_members Number of addresses to reserve in the pool of IPX addresses used when
dynamically assigning IPX networks.
Parameters Description
<admin_name> Designation you assigned to network service with the add
network service command. Limit of 32 characters.